东海电器有限公司

Donghai Electric Co., Ltd.

- Consumer hotline
- 0086-20-37592891 (601)
뀩
- QQ service
- Service hours
- Monday to Friday 9:30-18:00
- Wechat code

Quality is the best guarantee to maintain customer loyalty.

넳 넲

The main technical parameters:

Power supply: single-phase 220V, 50Hz, 1.2Kw

Air source: 0.5-0.7Mpa

Oscillation mode: electromagnetic frequency conversion, follow-up vibration

Electric control mode: main control PLC, operation touch screen (human-machine interface)

Powder filling method: double-column double-conduit

Tube filling diameter: customized according to tube

Tube length: 800 – 3000mm

Number of tubes: 12 – 24 pieces/time (depending on the size of the tube)

Output: 1000 pcs/8H (take pipe diameter φ9.5mm as an example) Dimensions: 1000 (L) x 1000 (W) x 8200 (H) mm Weight: 1000KGS

ꄴPrevious： Dust-free tri-centering filling machine

ꄲNext： Double aluminum tube and double-conduit filling machine

ꁆ ꁇ

Double-columns double-centering filing machine

The double-column double-centering filling machine is a new generation of powder filling machine developed and produced by combining advanced technologies at home and abroad. It has the three advantages of high quality, high efficiency and low price. The comprehensive economic benefit ratio of expenditure and income is higher than similar imported equipment, which is an ideal product for the electric heating pipe industry to replace imported equipment.

Related Products

H9

This product is a series of high temperature magnesium oxide powder without silicon or light silicon surface treatment. It contains four grades A, B, C and D. It is suitable for making air-fired electric heating components with different working loads. It can withstand high temperature heat treatment (such as annealing at 1050 C). It has no moisture-proof ability. After heat treatment, it should be sealed in time and effectively.

¥ 0.00

H8

This product is a series of high temperature magnesium oxide powder without silicon or light silicon surface treatment. It contains four grades A, B, C and D. It is suitable for making air-fired electric heating components with different working loads. It can withstand high temperature heat treatment (such as annealing at 1050 C). It has no moisture-proof ability. After heat treatment, it should be sealed in time and effectively.

¥ 0.00

H7

This product is a series of high temperature magnesium oxide powder without silicon or light silicon surface treatment. It contains four grades A, B, C and D. It is suitable for making air-fired electric heating components with different working loads. It can withstand high temperature heat treatment (such as annealing at 1050 C). It has no moisture-proof ability. After heat treatment, it should be sealed in time and effectively.

¥ 0.00

H6

This product is a series of high temperature magnesium oxide powder without silicon or light silicon surface treatment. It contains four grades A, B, C and D. It is suitable for making air-fired electric heating components with different working loads. It can withstand high temperature heat treatment (such as annealing at 1050 C). It has no moisture-proof ability. After heat treatment, it should be sealed in time and effectively.

¥ 0.00

M9

This product is a series of damp-proof and high-temperature resistant magnesium oxide, including A, B, C, D four grades, suitable for different levels of work load air-fired heating components, not suitable for high-temperature heat treatment (such as annealing at 1050 C), with strong moisture-proof ability, can be easily sealed, sealed before the need to do 200 350 C / 2 - 4 hours drying treatment of the components.

¥ 0.00

M6

This product is a series of damp-proof and high-temperature resistant magnesium oxide, including A, B, C, D four grades, Liaoning Magnesium oxide is suitable for different levels of workload air-fired electric heating components, not suitable for high-temperature heat treatment (such as annealing at 1050 C), with strong moisture-proof ability, can be easily sealed, sealed before the need to do 200 350 C / 2 - 4 hours of drying parts. Reason.

¥ 0.00

M7

This product is a series of damp-proof and high-temperature resistant magnesium oxide, including A, B, C, D four grades, suitable for different levels of work load air-fired heating components, not suitable for high-temperature heat treatment (such as annealing at 1050 C), with strong moisture-proof ability, can be easily sealed, sealed before the need to do 200 350 C / 2 - 4 hours drying treatment of the components.

¥ 0.00

M8

This product is a series of damp-proof and high-temperature resistant magnesium oxide, including A, B, C, D four grades, suitable for different levels of work load air-fired heating components, not suitable for high-temperature heat treatment (such as annealing at 1050 C), with strong moisture-proof ability, can be easily sealed, sealed before the need to do 200 350 C / 2 - 4 hours drying treatment of the components.

¥ 0.00

L9

L series is a heavy silicon modified damp-proof Electrical Grade Magnesium oxide, divided into A B C D four grade specifications, electrical grade magnesium oxide is suitable for non-air-fired electrical heating components (such as copper, aluminum, Bundy or stainless steel pipe, such as strong convection, contact heat conduction), not suitable for high temperature heat treatment (such as annealing at 1050 C), with strong moisture resistance, can be. Simple sealing.

¥ 0.00

L8

L series is a heavy silicon modified damp-proof Electrical Grade Magnesium oxide, divided into A B C D four grade specifications, electrical grade magnesium oxide is suitable for non-air-fired electrical heating components (such as copper, aluminum, Bundy or stainless steel pipe, such as strong convection, contact heat conduction), not suitable for high temperature heat treatment (such as annealing at 1050 C), with strong moisture resistance, can be. Simple sealing.

¥ 0.00

L7

L series is a heavy silicon modified damp-proof Electrical Grade Magnesium oxide, divided into A B C D four grade specifications, electrical grade magnesium oxide is suitable for non-air-fired electrical heating components (such as copper, aluminum, Bundy or stainless steel pipe, such as strong convection, contact heat conduction), not suitable for high temperature heat treatment (such as annealing at 1050 C), with strong moisture resistance, can be. Simple sealing.

¥ 0.00

L6

L series is a heavy silicon modified damp-proof Electrical Grade Magnesium oxide, divided into A B C D four grade specifications, electrical grade magnesium oxide is suitable for non-air-fired electrical heating components (such as copper, aluminum, Bundy or stainless steel pipe, such as strong convection, contact heat conduction), not suitable for high temperature heat treatment (such as annealing at 1050 C), with strong moisture resistance, can be. Simple sealing.

¥ 0.00

HPPG

JS-HPPG is a moisture-proof electrical magnesia, suitable for such as electrothermal iron pan (trough) hydraulic molding of electric heating components, commonly known as iron powder. Liaoning Magnesium Oxide how much a ton has a strong moisture-proof ability, can be wrapped in electric wire oil to press into any shape or directly into the metal tank, forming after 200 ~ 400 (?) / 2 ~ 4 hours of drying.

¥ 0.00

Stainless steel Pipe

Stainless steel Pipe

¥ 0.00

Copper –plated pipe

Copper –plated pipe

¥ 0.00

Iron-chromium aluminum heating wires

Electric heating wires: according to their chemical element content and organizational structure, they can be divided into two categories:
One is the iron-chromium-aluminum heating wire series;The other is the nickel-chromium heating wire series, which have their own advantages as electric heating materials and are widely used.

¥ 0.00

Terminal pin

Terminal pin

¥ 0.00

Copper flange

Flanges are mainly used on tubular electric heating pipes, especially water heating pipes. The materials that can be customized are brass and stainless steel.

¥ 0.00

Plug

Plug

¥ 0.00

Ceramic parts

Ceramic parts

¥ 0.00

Stainless steel flange

¥ 0.00

Flange

¥ 0.00

Nickel-chromium heating wires

Main uses: Product use: iron chromium aluminum heating wire is widely used in metallurgical machinery, ceramics, glass, far infrared devices, electronic components, loads, electric heaters, industrial electric furnaces, etc. Nickel-chromium heating wire is widely used in metallurgical machinery, medical, chemical, ceramics, glass, electronic components, electric heaters, high-temperature furnaces and other industrial heating equipment and civil heating appliances.

¥ 0.00

넳 넲

Home ꄲ jiqi ꄲ 基础型 ꄲ 灌粉机 ꄲ Double-columns double-centering filing machine

Fittings

Resistance Wires

Magnesium oxide Powder

Plug

Hardware Fittings

Ceramics

Pipe