ROLLING MACHINE
AUTO MATIC THREAD REELING MACHINE
FILLING MACHINE
AUTOMATIC SKINNING MACHINE
ANNEAL MACHINE
MULTI-FUNCTION MACHINE
PULSE CONTACT DING MACHINE

more...

Room 405,No.:172 Huasui Road, Zhujiang Xingcheng, Tianhe,Guangzhou,china.

TEL:0086-20-37592881
FAX:0086-20-37592887

LONGFENGSHENG

PULLY AUTOMATIC SKINNING MACHINE

LFS25-G-B2 type fully automatic skinning machine is designed by our factory according to the requirement of electric heating tube requirement of electric heating tube production and ahs the characters of one-shot automatic center aiming, automatic length control, double head simultaneous powder digging, user interface running at the same time operated by one person.

MAIN TECHNICAL PARAMETERS:

1 Working voltage: four-line three-phase 380V
2 Rated power: 1.6KW
3 Operating air source: 0.6~0.8mpa
4 Working efficiency: above 5500pieces/8hours
5 Processing length: 220~1000mm(special specifications can be custom-made)
6 Suitable pipe diameter: 6mm~9mm(special specifications can be custom-made)
7 Overall dimensions: 2100 850 1350(mm)
8 WeIght:800Kg

LFS26-YY-B type Semi-Automatic Oil Pressure Pipe Bending Machine,

mainly used to manufacture U shaped pipe products such as coffee kettle etc. It can use instead of Oil Pressure Machine to bend pipe, avoid many quality defect of pipe bending by oil pressure.

MAIN CHARACTERS:

1 It has the function of manual(adjust), automatic (produce);
2 Install emergency stop button and many safety phase limited sensor. The operation will be more safe and reliable.
3 The frequency transformation adjusting of pipe bending speed;
4 Change mould rapidly, it is good for elastic production, and safe the auxiliary working time maximum;
5 It can process more parts to single round pipe.

MAIN TECHNICAL PRAMETER:

1 Power: 3phases380V 50Hz 2.2Kw;
2 Fit range: variety kind U shaped and round shaped pipe which round arc angle 270degree;
3 Pressure of oil pressure: MAX:70Kg/cm2
4 Size of appearance:1400 1100 900(mm).

 

LFS30-SG-B type tube shrinking and feeding machine

is a special facility integrating inspection voltage and automatic feeding according that our factory develops according to the requirement of producing heating tubes. This machine has the characters of convenient operation, automatic continuous working, automatic inspection, automatic distribution and needless special attending


Anneal Machine

LFS66-35K type short circuit Anneal Machine, Uses the dry type transformer, Provides air operated clamps the organization to clamp the pipe on the beginnings and ends electrode Short-circuits using the low voltage big electric current and the metal outer covering form heats up outside the annealing to manage. Prepares for the part next step of curving forming, The machine is equipped with clamps the time delay circular telegram, the circular telegram timing control, the power failure time delay rising time control, Avoids the part and the electrode produces the electric arc but to injury and the part superficially attractive fineness. The transformer has the multi- groups tap to transform, May according to need to transform the output voltage, Annealing processing copper, aluminum, stainless steel or iron casing part.

MAIN TECHNICAL PARAMETER:

1 Smallest annealing length: 100mm
2 Biggest annealing length: 1000mm
3 Uses the power source: Two phase 380V,220V (ventilator)
4 Uses air resource: 0.6Mpa clean air compression
5 Peak power output: 35KW

more...

 
2006-2011 Copyright LONGFENGSHENG MACHINE CO.,LTD.
All rights Reserved. E-MAIL:info@lfs-machine.com